Innovations Bonding & Priming Agent - 1 Litre

Innovations bonding and priming agent liquid for use in promoting adhesion and reducing porosity of a variety of surfaces.

Fully compatible with the Innovations liquid tanking membrane system and the Hydromat self adhesive membranes.

Preparation:

• Ensure surface to be treated is completely dry and free of dust

Application:

• Ensure all surfaces are dry and free from debris, including dust, oil, wax and other contaminants that may effect adhesion
• Smooth or glazed surfaces should be abraded to provide a mechanical key
• Apply using a brush or roller at the recommended strength and allow to dry before tiling
• Concrete and porous surfaces: Apply 1 coat diluted to 3 parts water to part bonding agent
• Plaster: Apply 1 coat diluted to 3 parts water to part bonding agent. Then apply 2 neat coats to plaster before applying any cementitious adhesive
• Timber: Apply 1 coat diluted to 1 parts water to part bonding agent

Technical details:

• Pack size: 1 Litre
• Storage: Store unopened in cool dry conditions, protect from frost
• Application temperature: Between 5°C and 30°C
• The product is water based and will dry in approx. 1 hour in good drying conditions
• Health and Safety: Contains biocide, may cause an allergic skin reaction

Note:

• Can be used where dame conditions are likely, but not in areas where rising damp is present